Funny you should ask me that Steve, because this afternoon my wife looked at the drawers for the first time and asked if the drawers had stops. Her (valid) reasoning is if children are going to use them, there should be something there to stop them from pulling the drawer right out. I am ashamedOriginally Posted by Steve Clardy
to admit that I had not thought of it.
I figured out what I can do for each of the six drawers at the top of the cabinets. That is to install small corner braces (see: http://www.leevalley.com/hardware/pa...50310&p=50310) near the front of the cabinet and these will catch the drawer back so prevent the drawer from being pulled out.
I still have not come up with something far the six drawers at the bottom of the cases. Maybe something involving a bolt that slides in a groove that does not extend right to the front of the case (but I doubt that I can now cut such a grove since the cabinet it together. Any ideas anyone?
