Hi!

I'm looking for some advice on two benchtop table saws (limited garage space). Currently I'm looking at the two Skil Saw Worm Drive benchtop models (SPT99T-01 and SPT99-11). I plan to rip up to 2 inch thick hardwood and up to 7 feet in length. My question is as follows:

1. Both motors are 15 amps. Is there a benefit for me to get the 10 inch vs 8 1/4 inch if my max rip would be 2 inches with a rip blade, which is under the total max rip capacity of the 8 1/4?

2. I mainly picked these two because it looks like the fence has a rail slot to slide accessories in on the face of the rail and others did not. I'm mainly looking at the JessEm linked below because of this (don't want to spend $300 on the other JessEm model). Can anyone confirm those are actually rails for attachments? I didn't see any real mention of it in the manual?

Thanks!

https://www.amazon.com/JessEm-04301-...0O5TGQ50&psc=1