Final mod on the 'tree'.
Now that it is done I have an 8" main wyed off to a 6" drop with two 6" wyed off gates dropping down to five foot
5" hoses for the two saws, a 4" gate for future use on blade guards or whatever, and I just finished the final touch.
At the bottom of the tree, I put a 5" gate (because that is the size I had left), necked down to shortie piece of 4" hose to a home made floor sweep. That is something I should have done years ago, and it works great.
The whole tree is super solid, supported by three brackets on the 6" pipe, attached to the post mentioned on the original post. Mains in the ceiling are 8", going to a 3 HP Dust gorilla in an outside shed, with a 30 gal. barrel, with venting to the great outdoors.
Whew.
Last edited by Rick Potter; 05-01-2024 at 2:18 PM.
Rick Potter
DIY journeyman,
FWW wannabe.
AKA Village Idiot.
Reply With Quote