I currently have two bandsaws, a 14" Delta clone that I keep a narrow blade on to do curved work and a Laguna 14-12 that I have setup for re-saw work. My dilemma is that I was just offered a Grizzly G0513X2F bandsaw. The issue is that it will need some to a lot of work to get it back in good running order. It was under cover but outside and is a bit rusty and at least needs new tire and bearing. I am just wondering if the G0513X2F would be that much better than my Laguna (I just bought a new Resaw King blade for it that is still in the box). I am thinking that I will just get the G0513X2F and rebuild it, then decide what to do with all of the saws.