Pair of Dressers

[Mark Rainey]

Nice Glenn. Did you use seal coat thinned 50/50 X2? And what is your color mix?

[Michael Burnside]

That looks great. Looking forward to seeing the drawer fronts pull it together.

[glenn bradley]

Nice Glenn. Did you use seal coat thinned 50/50 X2? And what is your color mix?

Sorry for the delay in answering. Where I use shellac on the inside areas (to avoid off gas smells) I hit canned Seal Coat with DNA at 50:50. I use an oil varnish mix with some Transtint dye for color as a base coat on show areas. The cherry will color nicely on its own but I give it a jump start with a base coat of dye in McCloskey spar, BLO, and mineral spirits.

I don't usually use the word "thrilled" but I am thrilled to get back to work on these.
MBR Dresser (267).jpg
I was happy to get the base color coat and sealer coat on before my hand surgery. I anticipated a couple of weeks recovery that turned into four. At any rate; I sand the sealer coat to eliminate any irregularities.
MBR Dresser (264).jpg
I keep an eye out for clearance on shower curtains of a good weight. I have picked up quite a few for a couple of bucks over the years.
MBR Dresser (266).jpg
They make good heavy drop cloths that last a surprisingly long time.
MBR Dresser (268).jpg
The "arc wedges" I am using to give me ground clearance are actually the cut outs from my DC pipe hangers from years ago.
New Shop (308).jpg
I have tacked (a rag squirted with mineral spirits) all the parts and am ready to start in with the film coat. I am still not 100% so we will see how far I get. I plan to take the process in bite-sized chunks so I don't get myself into trouble .