Table Saw Motor Starter Switch

[Michael Zerance]

Feel free to add another "off" switch on the back or side near the back. Helps if you are one guy pulling big pieces off the back of the saw.
I bought a rope switch to use as a foot "off" switch. Took too much pull to be easy to adapt so I am still thinking. My lathe has a mechanical foot brake and off switch setup on it.
Bill D

Good idea, I'll think about it.

My 12/14 saw I unbolted the 5" tall plinth and added a 5" tall rolling base.
Bill D

Eventually it will be bolted to an outfeed table along with the Grizzly saw that sits at a right angle to this saw. For service and maintenance, I can use the forklift to move it around.