Newbie here and I tried a very quick google search, but I have not come to anything resolute.
So I am turning to experts before I take my corrective actions.
Currently the table top has two coats seal a cell, and two coats arm r seal.
All with minimum 24 hr+ dry time between coats in 68 degree basement.
My last coat I was hurried and I applied arm r seal a bit heavy in one section and it puddled.
Is this something that I gently sand out? Do I just apply another (lighter) coat to even out? Possibly even lighter coater with further dilution with Mineral spirits?
Looking for guidance....thanks
Brian
table1.jpg