Make sure the air linr on the receiving line is not blocked with debris from the break. you should be able to blow air into the diaphragm to signal the top roller shift. If it doesn't get air the path is blocked.
Hope this helps
Chuck
Friend of the Creek
Make sure the air linr on the receiving line is not blocked with debris from the break. you should be able to blow air into the diaphragm to signal the top roller shift. If it doesn't get air the path is blocked.
Hope this helps
Chuck
[OP]
Contributor
Solved my problem with the help of the discontinued Grizzly clone manual (they still make a 16 " open wide belt, but it's quite different inside). Turns out, I don't know why, I just needed more supply air. So anyone out there with an old Bridgewood, or SunHill, know that the G9983 is the same machine, with a great manual online, and a few parts still available at reasonable prices.
Posting Permissions
Reply With Quote