Had bought some "Project Boards" at Lowes, and was looking around for a Project to use some of it up. Started with a 1/2" x 5-1/2" x 48" plank. Paul Sellers had a Masterclasses Video (FREE!!!) with downloadable plans. And this is what became of that plank..plus 2 other small boards....
Sellers Project, close the lid.JPG
4" tall, not counting the feet, 6" wide on the ends, 12" long..not too fancy?
Sellers Project, Chained Lid.JPG
Well, there is a carved finger lift...a chain to hold the lid open, and a divider that can be removed as needed.
Sellers Project, Mini-bun feet.JPG
Simple little "bun" feet...but an end view shows off...
Sellers Project, end view.JPG
All 4 sides are hand planed into a curve..and the dovetails go along for the ride
Sellers Project, no gap back.JPG
Bottom and lid panels float in grooves, BTW...
2 coats of Amber Shellac for the finish...
Simple, little box...could always go back and add a felt liner..sometime...