Long time ago (last Christmas..) I made a Blanket/Hope chest...with a Aromatic Red Cedar floor.....have used up most of the scraps of Cedar since then...still had a small stash left...
Cedar Box Project, maybe.JPG
Thought about making a small box out of this mess. Cross cut saw was waiting for use...
A Cedar Box, cross cut saw.JPG
And the only end that needed "shot" was a "Factory" end...
A Cedar Box, 4 sides.JPG
Thought maybe a box about this size....maybe some finger joints at the corners?
A Cedar Box, usual first corner.JPG

Used a 3/16" sash chisel to space the fingers, and do the chopping out...
A Cedar Box, ready to saw.JPG
Disston No.68 was used to saw the lines,,
A Cedar Box, marking some lines.JPG
Use a No. 65 to mark the baselines...
A Cedar Box, all chopped.JPG
Also using some Ash scraps to help out...

Next time I meander to the shop...I'll see about getting the other 3 corners done...then see about a bottom and a lid
2 Stanley SW tools.JPG
The SW marking gauge..

Stay tuned...