Hi all,
I recently made a patio table out of cherry wood and finished it with Epifanes gloss varnish.
The finish did not turn out well - lots of drips on the sides and some dust and air bubbles and wrinkling in the top.
I put about 5 thick coats and was wondering if I could sand the finish down so it's at least flat and dust/bubble free on the top, and then put a couple layers of something else on top to have a nice looking, clean flat surface. I figure sanding alone won't work as after sanding it gets that really foggy and white appearance.
I was thinking one option would be something like Minwax Spar Urethane or something along those lines - can anyone recommend something that's readily available? I ran out of Epifanes and am not interested in using that product again.
The table will be on a balcony that will get some direct sunlight but not every day all day.