Ok so I am looking at purchasing a Festool CT SYS for use solely with my RO125 Festool Rotex sander. I am trying to debate the merits of getting it or the Fein Turbo 1. The Fein is under $290 and the CT SYS is approx $395. The CFM on the CT SYS is around 106cfm and the Fein is around 151 CFM. This unit will function solely as a vac for my sander. The reason that I am leaning towards the Festool instead of the less expensive and greater capacity Turbo 1 is because the CT SYS’s hose will lock into the port on my RO125 with power too which will help the pain in the butt factor with my current setup which is me having to delicately hold the hose in one hand and sander in the other to keep it from coming out. Plus the power cord always gets in the way. Another advantage to the Festool CT SYS is the ability to purchase the arm that holds the hose over and above the sanding area. Just not sure if going the CT SYS route would be worth the premium especially considering the price differences once the accessories are factored in and the fact that the Fein is 151cfm and the Festool is 106cfm. What do you guys think?