My electrician is finishing up his wiring of the new shop this week. All new construction, so no walls in yet, but will be soon. I meticulously laid out the wiring based on tons of input from y'all, hig and low outlets, separate kill switch controlling all outlets..so don't feel quite so in the dark here. But I have a quick question-
1. I am hoping to setup machines with a DC auto on feature when blast gate is opened. I haven't gotten to the design of the gates yet, or even specifics of what I'm using, got busy at work and the contractor started earlier than planned, so just a tad behind a few details like this. I currently have the heavy metal blast gates from Oneida with a 2HP commercial cyclone. My immediate question, is do I need to have any kind of specialized wiring run to each outlet from the DC in order to utilize the auto on feature? If so, what, or can should I instead use some kind of dependable wireless gate eliminating that need, and if so, what?? Want to get my electrician to do what that might require before we close up the walls end of week. Thanks so much!!