One of my woodturning buddies gave me a burl to turn. . Looked and turned a lot like elm burl. I centered it between centers, trimmed away as much of the non burl wood as I could with my electric chainsaw. Turned the exterior, reversed it and tighted it into a chuck. I set up my coring system and remove enough of the interior to turn a smaller bowl. Cut the inside with my bowl gouge. Finished with “home brew danish oil. It measures about 11” across and 6” wide by 4” deep. It is about 5/16” thick.
C6BA2292-B029-4D0A-8175-9AD5393C2B5B.jpg B06F02CD-A86E-49BC-9052-0530E7F725BD.jpg