Originally Posted by
Jim Dwight
Thomas, you can turn your Fein 350Q into the functional equivalent of the Festool Vecturo. My wife got me the plunge and depth stop attachments and I had to trim the piece that screws to the router a little + get longer screws to hold it on so I could shim it out with 3 1/4 washers per screw + grind the head of the longer screws so they did not protrude. Nothing major and the Festool attachments work fine with the Fein. The Venturo is about $600 and the attachments were well under $150 - so you can do it for about half the cost.