Can anyone clarify this for me. In digging out my Titebond II from storage I read on the label that it says "...not for structural or load bearing applications".

In building my torsion box (that you folks kindly helped me with, thank you) I was thinking that the box could be used on saw horses. This would, obviously, turn the torsion box into a load bearing torsion box. Is this not recommended?

OR, are the labels just referring to construction type structural loadbearing?

I have to believe that WWing glues, used according to manufacturers specs, have to have some structual strength to accommodate entertainment centers and other heavy applications.

Thanks very much.