I need some opinions of woodworkers with more experience. I'm on my 3rd lever cap for a Lie-Nielsen #8. It's a brand new plane that I received on the 20th of October. The first cap had the lever bent so it was extremely difficult to operate. The second and third it doesn't appear that the lever was machined correctly so the cam action doesn't operate. I hope this makes sense. If I tighten the screw any more I can't get the cap on. When I do get the cap on, once the lever is down it's not tight enough and can wiggle around. Any help is appreciated. Good 4-1/2 lever cap on the right for reference IMG_20171115_183401.jpgIMG_20171115_183345.jpg