Would adding 3/4x1" edge nosing to a plywood counter with just nails and glue be strong enough or does the edging need to be applied with clamps?
I built 3 cabinets that sit side-by-side, all same height, but with the middle 4" deeper. I have a plywood counter that I now need to add nosing on the front edge. I had planned to route a 1/4" roundover on the trim, miter it and then nail and glue it on, sand and paint since this is all going to be painted white. I can use clamps since the top is not attached yet, but it is the mitered corners that I think I need to add in place to get them nice and tight.