What's the best way to refinish this 4x10 teak outdoor table and the seven teak chairs?
For most of it I'm tempted to apply a deck finish, rubbed in using a white nylon pad, then wipe it dry ten minutes later.
I could be persuaded to use a random orbital on the table top, and the thick sides of the top, prior to rubbing in the oil, but not unless it the best way to go.
The chairs have so many back spindles I would like to avoid having to sand each and every one of those.
By the way, this is not my furniture, I got asked by someone and even though it's not what I do, I've ended up taking it on.
Any and all opinions welcome. Thanks!
Screen Shot 2017-10-11 at 9.53.16 PM.jpg
Screen Shot 2017-10-11 at 9.53.35 PM.jpg
Screen Shot 2017-10-11 at 9.54.41 PM.jpg
Screen Shot 2017-10-11 at 10.04.25 PM.jpg