Okay. I made my first cabinet door. Nothing fancy but it coming out okay so far. I used 3/4" by 2.5 inch white pine for the frame. There is a 3/4" by 2.5" brace across the center. I used two 1/4" dowels at each joint and yellow glue. The door is for a jewelry cabinet and it is 20" wide and 37.5" tall. I plan to route a 1/2" dado in the backside of the 2.5" frame and put in a 16x16 plywood panel in the top and bottom.
Here is my question - can I glue the 1/4" birch plywood in place. Since plywood is pretty stable or do I have to float it because of the white pine frame?
Thanks.