In this case I'm speaking specifically about Waterlox, but my question would apply to most cans of finish or anything that can harden. Waterlox has one of those push down, squeeze and turn types of caps. Like many of us, I have difficulty pushing down on the cap while at the same time squeezing and turning. I'm pretty careful to clean the area around the threads of the spout but even so it is still difficult. In fact, I had difficulty with a brand new can I just began to use.
So the question is if there is another type of top that I can purchase and substitute for the original or if there is something else that I can do to make these tops easier to open?