Ok, have a bit of both Curly Maple and plain old Maple left over. Need to find some ideas to use them up...
IMG_1868.jpg
Have this panel. This is how it came home..3 board glue up, 15" wide x 31" long.....top?

There is a pile in the shop..
IMG_1871 (640x480).jpg
Mostly Maple. Walnut is down to small bits and pieces (trim?) the rest is Pine and Poplar
Maple seems to be in this size..
IMG_1872 (640x480).jpg
1 x 6 and 1 x8 around 2' long or so. Nice stack..
IMG_1878 (640x480).jpg
There is ONE board that seems to say "Drawer Front"
IMG_1880 (640x480).jpg
Wild grain. There is also what remains of another wide plank
IMG_1879 (640x480).jpg
Yep, that split finally came apart. There are 5/4" thick.....stiles for ...?

The Poplar can be sides for small drawers. Pine can be for frames inside a case. Or just more jigs.

may just sleep on this a while...I think I need a day off, after that Walnut & Cherry Box project....Single Brain Cell Sketch Up is "Off-line" right now.

Stay tuned....may come up with something to cobble together...