I need to color fill an engraving I did on marble. Problem is its not deep enough so when I wipe off the paint it come out of the engraving also.is there a way to fill it and get the excess off with out it coming out of the engraving?
I need to color fill an engraving I did on marble. Problem is its not deep enough so when I wipe off the paint it come out of the engraving also.is there a way to fill it and get the excess off with out it coming out of the engraving?
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
try Rub n' buff--
rb.jpg
works good on rock- takes some rubbing to get it off the smooth but it hangs on the etching nicely. Hobby stores, lots of colors--
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now - fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
Bert
I've never had much luck with color filling marble but if you use Rub n Buff the solvent is mineral spirits. Take a perfectly flat piece of plastic or wood and wrap it tightly with a lint free cloth such as a rag from an old bed sheet; put a little ms on it and see if that will clean up the excess without removing the fill.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Thanks Guys I'll try it
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Rub and buff works good, also Lasersketch sell a white color fill that works great
TROTEC Laser, Roland SP300,SAWGRASS SG1000 Sublimation Printer, Q1 Mod New Hermes Vanguard 3400 Engraver, Daige Laminator, Next Wave Shark HD510 CNC
I did a Piece this weekend.
We left the mask in place and used an airbrush to color fill. We used auto colors, so the color was permanent and uv fast.
Looked great! I wish I took a pic of the piece though...
Kehui 100w 900x600 with adjustable z axis table,
3 jaw chuck rotary
CW 5000 water chiller
English version RdWorks V8.01.28, ( newest version )
Windows 7 & 10
Corel Suite X8
30w Fiber Laser with Raycus power source
rotary and other fun toys I know nothing about yet...lol