Hi,
After 12 months of mulling over buying a laser cutter, I will be placing an order for either a Thunderlaser or Bodor laser.
I have been offered an 80W Thunderlaser or either a 80W or 100W Bodor laser. From what I have read up on this forum and other articles I believe 80W is a good choice for cutting and laser engraving (please correct me If I am wrong). So I am thinking of the 80W for upto 10mm cast acrylic, laser ply engraving and cutting.
One thing that I need advice on, Bodor are claiming 4000 DPI 'Highest Scanning Precision', can anyone explain what exactly is meant by 'Highest Scanning Precision'
Other manufacturers are claiming 500-1200DPI so Bodors 4000DPI seems well beyond what other manufacturers state or have I misunderstood something.
Any advise will be welcome.
Thanks
Daz...