George you could pick up a piece of lexan from Mcmaster Carr just around the corner from you
George you could pick up a piece of lexan from Mcmaster Carr just around the corner from you
Try to find a copy of Bill Hylton's book "Router Magic." He shows how to make several bases and jigs for router. It came out in 1996, so will most likely be hard to find. Wife bought me a copy at American Woodworker show in Fort Washington PA. What a trip. Son worked for airline, so air fare was free, and school system picked up tab for admission, car rental, tolls, meals and lodging.
You never knew McMaster was there? You've been shown the light George!
There's also Profesisonal Plastics in Twinsburg who I've used before.
"Hey! Has anyone seen George lately?"
"No. We used to see him around here all the time. Now he never comes in."
"I heard someone say his car has been seen in the parking lot down at McMaster-Carr. I guess he's found someone new."
Have you seen this one? http://www.rockler.com/rockler-compa...e-with-handles
Charley
I have a 611 and have found that I prefer just wrapping my hand around the fixed base and using it that way. The plunge base already has handles like it's bigger brothers. I suggested the Rockler base because I thought you wanted a slightly larger fixed base with handles. With handles, makes makes itr a bigger and more stable base. I've made tear drop shaped bases with one handle off toward the narrow end and they work well, but I haven't seen one made small enough for the 611 fixed base. A little over a year ago I bought a CRB7 multi-purpose base. Since then I have used it with most of my routers that have guide rod holes. The 611 plunge base works well with it, but the fixed base 611 has no holes for it. The CRB7 has many uses, and it is also larger, but is so much more versatile. It functions as an offset base with handle, and there's even a drop down leg to help you do edges without tipping, a wide range circle cutter, an edge trimmer, A fine adjust feature, and now they have an adjustable dual fence base for doing mortises, for hinges, locks, etc. It may not be a good fit for your present need, but it has been very handy to have for me.
Charley