Bill, the good news is the one on the right only took 1 hour and 3 minutes to run. Not kidding, that's what it took. Obviously there's something going on wrong, but I'm not sure I'd let any machine run 1 hour and 3 minutes on something like that before stopping it and trying to figure out the problem.
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.