Playing with my new machine today. Boy the etching on glass was alot more than I thought, very smooth.The bear in a bear was only 3'' long, end of the trail is 2'' long, the e eagle is 2'' long. I'm very happy.
Thanks Ron Sleeman
Playing with my new machine today. Boy the etching on glass was alot more than I thought, very smooth.The bear in a bear was only 3'' long, end of the trail is 2'' long, the e eagle is 2'' long. I'm very happy.
Thanks Ron Sleeman
sorry for the sideways pictures..lol..
Wonderful Work Ron, what masking or covering did you use over the glass before engraving
Half Kiwi, Half Pom, All Crazy
Trotec Speedy 300 - 80W (1.5" + 2.5" Lens)
Harsh Environment Kit, Rotary Attachment
Atmos Compact Exhaust, CorelDraw X7
Hello Jack: I did not masked them or any covering on them. I just used Trotec's settings.
Nice work, I'm surprised the Trotec settings for me were way to low to engrave into the glass, I followed the guide from Trotec Canada's youtube page using 100% power and about 60% speed for an 80Watt but they suggested a masking tape or wet medium to disperse the surface heat to stop flaking.
your glasses came out so well
Half Kiwi, Half Pom, All Crazy
Trotec Speedy 300 - 80W (1.5" + 2.5" Lens)
Harsh Environment Kit, Rotary Attachment
Atmos Compact Exhaust, CorelDraw X7
Jack I used 100% power and 40% speed with Resolution 500 with halftone...Jarvis
Sorry Jack, I have a Speedy 400 with 80 watt
Very nice Ron!
Trotec Speedy 400 120w, Trotec Speedy 300 80w
Thunderlaser Mars-130 with EFR 130w tube
Signature Rotary Engravers (2)
Epson F6070 Large Format Printer, Geo Knight Air Heat Presses (2)