Yikes it sounds like a real pain to get multiple pass's. Laser cut has a box for it just put in a number and it does it, same for both raster and vector.
Contributor
Yikes it sounds like a real pain to get multiple pass's. Laser cut has a box for it just put in a number and it does it, same for both raster and vector.
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machineOh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
[OP]
Member
Yep was as simple as putting the number of copies I wanted printed. DOH !
Would have never have thought of that. Well I thought of it but figured it would just send multiple jobs to the printer.
Thanks guys !
Epilog Helix 45
Corel Draw X7
Stepcraft 840 CNC
Fully outfitted woodshop
I'm a PC...........
Member
On LaserPro Spirit if you have multiple copies of the same curve on the same layer it will do each copy at the same run and without homing. The colour of each curve can be the same so no need for a different colour mapping.
However if you try to send more than one copy of the same job from its print driver with "Print immediately" option it will do only first copy then goes to home and does not do any other copies
GCC Spirit GX Pro 100W(synrad)
Laserlife Ezlaser LCW 300W(Yongli DLT-300)
Posting Permissions
Reply With Quote