We just moved from a 30w Helix 24 to a 75w Helix 24. On the 30w we used 8 speed/100 power to cut 3/16" acrylic, and 12 speed/100 power to cut 1/8" acrylic. Both at 5000hz. 99% of the time there is zero flame, perfect cut.
We are miserably failing at finding good settings on the 75w. Pure flame-thrower every time. Any recommendations on what settings you use to cut acrylic with a 75w Epilog?
Any help is GREATLY appreciated!
-Terry