We have decided to refinish the dining table instead of replacing it. Initial test shows that the finish is not dyed. The apron and legs are still unblemished so I will cover them up until the final finishing coat.
I am deciding between mechanical and chemical means.
Mechanical:
1)Scraper
2) Hand sanding or ROS at 120 to 220
Chemical:
1) Use DNA and Lacquer thinner to determine finish.
2) Strip with a Methylene Chloride stripper or NMP (Klean Strip 7).
Question - With these strippers do I even need to do step 1 of determining what kind of finish this is?
Finish:
Waterlox original. 3 coats, wait 30 days, finish with wet & dry and micro abrasives through about 8000 for a semi-gloss.
I am seeking advice, corrections or confirmations that I am on the right track.
Thanks in advance.
Brian Kent