Hello everybody,
This is my first time posting down here so please bear with me. My FIL is the one with the laser and he bought it solely for use with his hobbies, so he is still on the learning curve as well. He has the epilog, I beleive it is either 25 or 35 watts and the cutting surface is 12x24.
I am wanting to make some stickers for a certain club that I belong to that members could put on their cars. Very similar to what you all have seen driving down the road in all varieties. I was thinking of using a vinyl sheeting sticker type material so that they would be weatherproof and durable. Could the laser cut something like this effectively. Is there another material that any of you can recomend or has anybody tried this or something similar. If this is possible does anybody know of a source for this type of vinyl or a material that will work.
I understand their is risks of using vinyl as it releases a poisenous gas, but have read that with a good collection and ventilation there should be no problems.
Any advice would be appreciated.
Thanks,
Chris