Ray,
Very interested in hearing more about this bandsaw, particularly brand/model # so I can see what I should be looking for.
Ray,
Very interested in hearing more about this bandsaw, particularly brand/model # so I can see what I should be looking for.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
The brand and model are not as important as the power and how smoothly it operates (no vibration). Mine is a Grizzly 18" w/2HP 110/220 motor (model G4186Z). I run it on a dedicated 220 circuit. I bought the bigger size because I was making bandsawn boxes that required the deeper throat. I was scroll cutting box blocks 18" long, up to 11" wide and 6 to 8" thick with a 3/16" width blade. Hard Maple, Red/white Oak, not a problem. Getting back to the subject, you can buy a band saw designed for resawing for a lot less than I paid for mine. The machine has to be fine tuned and you need a good stable fence squared to the blade. Then you need to perfect your technique to run your material smoothly through the saw with consistent speed and pressure on the fence. The name of the blade I use is Wood slicer, not veneer slicer. I buy mine from Highlandwoodworking.com. The company says they have cut slices 1/32" thick 8" wide, and started sanding with 100 grit. I can resaw Jatoba 9" wide and that's some pretty hard stuff. I generaly cut my stock to length before resawing. Easier to handle. Any questions, I'll be glad to help
I wish I could make it. Sounds like a great learning experience and I would like to put faces to names......but I have to work...........So maybe in OCT!
Alright! Its official! I will be attending. I may not make it for some of the morning activities but I will try to make it for as much as I can. My boyfriend will be coming along with me.
We look forward to seeing you guys on Saturday!
Gerber Composer, Omega, & Edge
Adobe Illustrator and Photoshop
--------------------------------
Previously: Epilog Legend EXT 75W
Glad you can make it, Amanda... due to the length of the drive I may miss some of the earlier morning stuff, but I'm certainly going to try and be there as early as possible (don't want to miss out on that country ham... yummy!). I think you'll find the trip well worth it considering the sheer amount of combined knowledge under one roof.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Amanda I have saved all the really good stuff for after lunch so take your time and be safe looking forward to meeting you.
Dan the Ham will be out all day. By the time you go home you might feel like a salt block......LOL
A side note, but relevant to those in the mid-Atlantic region...
NASA's Wallops Flight Facility will be hosting a Minotaur I rocket launch this evening sometime between 8-11 p.m. The Minotaur uses a particularly hefty main thruster, which means it will be quite bright. If you enjoy a good launch (or fireworks), you may want to watch the clock and see if this bad boy goes up this evening.
Wallops is near the VA/MD border near Chincoteague, just south of Ocean City. Here's their website:
http://www.nasa.gov/centers/wallops/home/index.html
The amount of power coming out of this little pencil makes our lasers look like keyfob LED lights. I'm less than 120 miles away, so it should be BRIGHT!
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Just let me know where and when. Mike
Well, the launch had an 85% chance of getting scrubbed... and it was. Next attempt is tomorrow (Thursday), same time frame. Chance of getting scrubbed is down to 45% for this one.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
What time to the dancers get their Angus?
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
“Life is not so short but that there is always time enough for courtesy and chivalry.” —Ralph Waldo Emerson
Everybody knows what to do with the devil but them that has him. My Grandmother
I had a guardian angel at one time, but my little devil got him drunk, tattooed, and left him penniless at a strip club. I have not had another angel assigned to me yet.
I didn't change my mind, my mind changed me.
Bella Terra
I was told if I come home too late to be prepared to stay in the doghouse... is that the same thing?
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5