These are only $1.89 each, not sure if and what shipping is if you need it. Had a similar problem with a different size until I found these larger sizes.
...
Type: Posts; User: Carl Kona; Keyword(s):
These are only $1.89 each, not sure if and what shipping is if you need it. Had a similar problem with a different size until I found these larger sizes.
...
Kevin,
In addition to what the air handling guide provides you can use the attached chart to help with your calculations. So if you have 3 4" machines with each requiring 300-400 cfm running...
Tim,
That Jet is a screaming deal. It is significantly better than any HF DC you can get. That unit has a 12" impeller which moves a lot of air and more importantly the larger diameter has more...
For others looking for hoses, someone turned me onto this site (catering to car washes, etc) I have not tried them, but look like a variety of quality hoses.
...
Bill I do not have the Wixey pair (but plenty of other of their products - love the TS digital scale). However I do have my dad's analog calipers and my off brand digital pair and have been using...
Steer clear of PALS/ In-Line industries! I ordered a pair of PALS over a month ago and after a couple of weeks with no parts or notification I tried calling, no answer and mailbox was full. Emailed...
Lee,
Thanks for the tip! I just used some new belts that were 5-10 years old and I went through two pretty fast. I guess they don't make 'em like they used to. I don't use a belt sander that...
Sterling,
Here is a video on removing the stain with oxalic acid. But he warns against using it on veneer as it could delaminate.
https://www.youtube.com/watch?v=NNFQDOz5kmo
Joe,
Your best bet is to ask in Phil's forum 'http://www.jpthien.com/smf/index.php?PHPSESSID=ao3orgjacgj9eh4bqdj7c63j15&board=1.0 that is all that is discussed. From my recollection of my days in...
Jeremy,
I ran into the same problem at my Menards, 26 pcs for the white SDR. What I also found out was they have the green SDR outside (not next to all the other PVC). So if the color doesn't...
Mike,
I wish I did see best design practices statements more frequently, unfortunately I see more statements about how someone made something work and another reader takes that as the norm. ...
Roger,
If you look at the FAQ for SDD and SDD XL you should find your answers but in general the SDD has a 5" input so that is the maximum duct size for that separator (and generally the optimum...
Brian,
Agree with others V2000. Your modified HF will not come close to the performance of the Oneida. The other issue is the time to do all the modifications and the time just to get the...
Larry,
It depends. It depends on what and how you are using your DC. On the plus side you are eliminating the filter and ducting outside. The downside you are taking a 7" duct ~38 sq. in) and...
Jeremy,
Here are a few sources for some of what you are looking for:
Blast gates and hose are available here 5" Aluminum ~$12 http://www.blastgateco.com/Cast-Alum...last-Gates.php
Wyes here...
As Andrew stated a cabinet or Hybrid is the best solution for footprint. I just replaced my contractor saw with an older Delta Hybrid and what a space saving change. The motor being inside the base...
Roger,
See comments below:
Thanks for that David. I never paid attention to how significant the entry loss is on a plain end duct. When I measured my unit and it was about 2" with an unrestricted test duct (which matched...
Rod,
I am confused. I understand that 1.8" is what is measured at that CFM but isn't that the pressure drop of the cyclone? Why wouldn't they measure at 1" or 1/2" and get a higher CFM to...
Rod,
When I look at the Oneida curve I see 1510CFM @1.8" SP, which is stated to include the filter. So if someone determines they have 4" of static pressure in there shop ducting (less cyclone...
Joel,
There is another end of the spectrum you should consider when thinking about 8" main, that is the required CFM at the 4000FPM in an 8" duct. As you go larger, your required CFM to maintain...
Craig thanks for putting in the link!
Matthew - Yes the crimps are on the correct end from Kencraft
Foil tape is what I use to seal fittings.
+1 on Kencraft fittings
Someone just turned me on to Grainger selling 5 packs of 26 gauge 6" for $63. That is less than what BORG sells 30 gauge.
Dirk,
The advice above is spot on. You will never get anywhere near 1700CFM from that unit. When DCs first started reporting performance they were single stage and listed what the "FAN" could do...