Search:

Lee, I appreciate the advice. I might relay that to the client and see what they say!

Hello braintrust... I'm working on estimating a client build and I'm in search of some hardware. They're looking for a couple room folding partitions for separating 'classrooms' in some larger rooms...

I'm not going to be contributing any of my own thoughts to this thread, but I'd love to give RR Buildings a shout out for this type of build. His YT channel might answer a lot of the questions you...

Thanks everyone for the advice thus far! Here is the next iteration... Obviously there is more center support now for the bottom boxes, but the bottom stretcher also got thickened a little bit to...

I also meant to add that the whole thing only spans about 45". The longest shelf is ~35" and it's a little under 30" tall.

Lee, Stan, I appreciate the feedback! I'm wary of the structure, too. I'm contemplating bringing the stretcher in the base up to fully support the entire bottom surface of the shelves and potentially...

I'm working on designing my next project and I'd like to get the communities opinion! I've got two versions designed currently and I'm curious what other people see and which they prefer. The plan is...

I understand you might not want to, but if you'd be willing to sell separately I might be interested in the bench dogs/accessories. Let me know!

I'm the proud owner of an ancient Graco HVLP Turbine sprayer, but the gun it came with has always been a disappointment. Does anybody know of replacment guns that aren't several hundred dollars?...

I think the DW735 is listed as planing stock as thin as 1/4". I think you would be safe with whatever half of your 3/4" stock turns out to be. I would just take as light of passes as possible to be...

That was definitely something I was paying attention to with the internal supports, they get close but no holes are blocked. After taking a look at a couple of my tools, I might need to increase the...

I'm looking for some opinions, feedback, lessons learned, etc. before I finally commit to building the outfeed/assembly table I've been thinking about for a while. It's based on a paulk style...

It is a noble mission you're on, not wanting to paint nice furniture.

I find what makes the most difference for the yellow tint of both maple and white oak is the finish you use. I have a maple...

That's nice to know that a more current tool has a lot of compatible parts. I know Delta is real bad about discontinued stuff.

Missing the helical head is a good point, but I see that they're...

I know they're probably not, but if the threaded inserts are proud of the surface at all you can mark them up with a sharpie and then lay the other board over top to transfer the marker. Another...

Hey all! I currently own a 6" Jet jointer upgraded with a shelix helical head. I bought it for maybe $700 a couple years ago and I've been wanting a little more capacity. Not necessarily width, but...

I'm thinking that's what I might need to resort to. I'm hoping to get as close to the original as possible.

I picked a used 30th anniversary edition recently and for some reason unknown to me, they took the upper wheel off and misplaced the bushing that spaces the wheel out from the back of its mount. Can...

Hey y'all, a Grizzly 17" bandsaw (G0513 35th anniversary edition) popped up near me, but the poster is asking $1500. Given the 40th edition new is selling for $1450, I know I need to talk him down....