Ian, I have a 4 stage fuji that I switched to a few months ago from a airless. I had the same issue early on. For me it was too much overspray in the air that was not exhausting fast enough. I...
Type: Posts; User: Evan Stewart; Keyword(s):
Ian, I have a 4 stage fuji that I switched to a few months ago from a airless. I had the same issue early on. For me it was too much overspray in the air that was not exhausting fast enough. I...
Thanks for the info guys. I used it yesterday and it is awesome!! Wish I had bought it with the system. I wish i had chose the siphon gun instead of the gravity feed when I bought the system but it's...
Great! Thanks Andy. The pot on the video looks about the same as the fuji. I guess the only other answer I need is regarding cleaning/ storage. I have heard people say it's fine to store paint in the...
Thanks for the response Travis. The unit I bought is made by fuji and i assume is designed to work with the turbine and not a separate compressor at least I would hope so considering it was $250 for...
I finally decided that it would be worth investing in a pressure pot for my fuji 4 stage system. For the last 2 years 75% of my customers have wanted white finish and my go to is BM simply white so...
That has been my experience as well. I have definitely been guilty of giving away extras. This was especially true doing renovation work. I have found the majority of customers when faced with the...
Thanks Jamie, that would be my first choice. I just realized that I neglected to mention that they want a diagonal design. This is what has me tryimg to figure out a relatively low labor cost...
I had a customer change a design on a cherry cabinet that will be above their refrigerator. This tiny cabinet has become quite a challenge. It is replacing the existing one to make room for a larger...
I am going to the house tomorrow to do some work on a pantry and cabinet interiors. Unfortunately they are out of town for the next couple of weeks so pictures are the only way to visually...
Oh man, a lot of good answers. This is exactly what I was afraid of, no matter what I do it's pretty much a crap shoot. I think at this point I am inclined to agree with Sam's course of action. The...
Several months ago I got a call from a customer who needed some help making changes to her kitchen. It is the first kitchen in a long time where I actually advised against replacing the existing...
Very helpful, this is definitely what I need. Glad to hear that even the less expensive unit works well. I'm definitely not a person that invests in the most expensive equipment until after getting...
I had a similar situation with a thin kerf blade awhile ago. My theory was that the blade had warped slightly after milling a decent amount of hard maple that was binding the blade due to internal...
My shop is setup in an L shape. The 2 220v circuits are set in a way that it would require me to crawl under the table saw extension over DC hoses and then run a 15' cord to reach the area that the...
So as i expected it sounds like most or all of the shortcomings I find in my router table would be solved with a decent shaper. My main complaint with my RT is that I find it difficult to get truly...
This is definitely a difficult decision. I can totally see how having the ability to reverse directions would be very helpful. I also would like to be able to do more molding profiles and all of the...
I am thinking about picking up a small shaper, something around 1.5hp-2hp. I would not have space for both the shaper and my current router table in the shop. My RT setup is a shop made table made...
I use the ones that are not threaded all the way up when the cabinets have a natural or non pigmented finish for exactly the reasons you stated. I actually realized after reading your response that...
I definitely find the GRK screws to be the best ones that are readily available at a store. They have WAY more strength than drywall screws and come in a variety of sizes. My cabinets have 1/2" backs...
Haha, I was looking through the manual last night and the way it explains how to use that thing makes it sound like open heart surgery. I was starting to get a little concerned, if changing the paper...
I picked up the sander today and it is in great condition. It turns out it belonged to an older woman who had been using it for picture frames and small projects. She has arthritis really bad now...
John, I hear you on the cyclone. I definitely dont have the space now to add one of the large units. I wonder if one of the small Oneida dust deputy ones would work just for sanding? I know it would...
From what I have read it is the same machine. Thanks for the review, I think I'll go ahead and grab it.
Thanks for the reply John. What i am hoping for is to be able to run face frame stiles and rails through after everything has been jointed, planed and cut to size. I'm also hoping that I can run...
I have been wanting a drum sander for a while now and i have been watching Craigslist religiously. I have never owned or even used one but based on my research it seems like something that will be a...