Search:

I'd stay with the Jet until you can make a bigger jump.
JMO,
WP

What if you moved the electronics bench to the area marked storage by the doors & finishing room? Make the area where the electronics bench was storage. Then swap positions of the clamp rack with the...

I carry a notebook out pretty often, with a wireless router I can access the web, etc. Pretty handy for a lot of things as the others mentioned.
WP

I have a couple of Marvin 1500 watt radiant heaters that I bought from Lee Valley on a closeout a few years ago. The shop is 20x30 with 8 foot walls and 12 foot peak ceiling. They are plain not fancy...

Dave,

85db is fairly noisy to talk above, especially since the frequency is rather low on a cyclone. I have a 2HP Oneida Commercial and I usually turn it off to talk to anyone. That said, I don't...

Mike,

I think it depends on how many CFMs your DC is capable of moving. Moving 500 cubic feet of air per minute will empty most small shops pretty quickly and you have to replace that air from...

I think you would get much better performance if you went ahead and insulated the walls and the rest of the doors. We have similar heat here and that's what I ended up doing.
WP

I have the Oneida 2HP Commercial and while it does make noise the frequency is lower than most power tools. Mine is wall mounted and _some_ day will be on the outside looking in. I'd concur with the...