First: That grip/knob will fit a Lee Valley Veritas® Customizable #7 Jointer Plane (06P07.71A and all customized versions). It screws into the fence holes which are standardized on the Lee Valley...
Type: Posts; User: John Schtrumpf; Keyword(s):
First: That grip/knob will fit a Lee Valley Veritas® Customizable #7 Jointer Plane (06P07.71A and all customized versions). It screws into the fence holes which are standardized on the Lee Valley...
I have one, it is a good detail file:
GROBET HALF-ROUND VULCANITE FILE
31-384 HALF-ROUND VULCANITE FILE
360-313-841WB
1/2 Round Vulcanite File
Mfr Part: 31384
I took an inventory:
Veritas Low Angle Block
Veritas Left Skew Block
Kunz Plus No. 3 Smooth
Veritas Small Bevel-Up Smooth
Veritas Custom #4 Smooth (40°/50°)
Veritas #5-1/4W Bench
Veritas...
Yes, there is a difference between a "Plowing" fence and a "Rabbeting" fence. When rabbeting, a fence that clears underneath the skate(s) and blade is needed. When plowing, a fence that comes above...
If the overall dimension of the piece is not critical, this is another advantage of doing tails first and gang cutting them. If I over-chop the baseline, I can strike a new baseline on the pair of...
In case anyone is wondering, 0.3MM is approximately 1/85 of an inch.
The Japanese use a plane to shave dried, fermented and smoked, tuna. It is mounted upside down on top of a box.
search for: dried bonito shaver
Paul Sellers is a good teacher and gives away a lot for free. As for his philosophy, well he is from the hippie age more or less (I'm from the dazed and confused age).
I like Pfeil chisels :)
Did you try it with the generator's economy control switch set to Off?
Note: "O" is off, "|" is on
Out of curiosity, do the furnace's electronic controls freeze or reset/recycle when this...
I don't have a grinder, but I do have a coarse/fine crystolon stone, as well as my water stones going down to 80 grit. For chipped edges I usually just freehand on an appropriately coarse stone. For...
I have an aversion to socket chisels. When I was young, I hit one and the handle decided to seat all the way down to the shoulder, catching a piece of my palm.
Cows look really big when your driving an Opel Kadett. 1:30am, flying down a rural road and noticed shadows ahead. Then in the headlights a COW, hit the brakes hard and then let up to swerve around....
I have two 10" and two 14", I use them for work holding.
That's called a breasted toothline or something like that, some saws are made that way.
I use one or two cabinet maker's vises:
403034
For those without a subscription:
https://www.finewoodworking.com/readerproject/2019/02/06/butlers-desk
Also the grooves for frame and panel, bread board ends, tongue and groove (although there are dedicated tongue and groove planes).
https://jalopnik.com/this-is-the-awesome-way-railroads-keep-tracks-warm-in-w-1518853720
One of the most important things a railroad can do is keep its switches functioning. If one important...
I believe Derek is referring to a discussion you will find if you search for (include the quotes):
"Surprises from Ian Kirby's Dovetail book"
And I slightly undercut towards the center, when...
I'm in Doug's camp with the thick irons, thicker blades are easier for me. I freehand sharpen/hone full flat bevel, and use the existing bevel to register on the stone.
That would just add injury to insult :)
Irish Spring, I like their commercials.
That depends, on whether the ease of cheating outways a mitered fit. If one keeps the top piece square, and just angles the edge of slanted lid. The pointy bit on the lid edge above the top piece,...
TR = Tuner Ready. In 2006/2007 Subaru made a WRX with all the performance parts, with the base Imprezia interior and exterior trim.