I wish I could bury some steel in there. It'll be in my own home so it should be pretty manageable, but Im envisioning someone sitting at a couch and putting their weight on the front edge to help...
Type: Posts; User: Christopher Juncosa; Keyword(s):
I wish I could bury some steel in there. It'll be in my own home so it should be pretty manageable, but Im envisioning someone sitting at a couch and putting their weight on the front edge to help...
Thanks Lee. Can you elaborate on the spline grain orientation? Im having a hard time visualizing. Are you saying the grain should be running the width of the spline (opposed to the length)?
The boss has handed down a request for a C-Table like the one pictured. My main concern is the strength of the joint where the top meets the vertical back (obviously).
Does anyone have an...
Julie,
Thanks for the reply. this is actually for a solid body electric bass. The overall dimensions are (ish) 14 x 21 for the body blank. The gist is that I have 5/4 stock thats ~9" wide so...
Hi all. I have a project that will use panels that are laminated. My question is whether I should stagger the seams on the upper and lower pice of the laminate? This particular project is a guitar...
That sounds good. The table top is strong as is so I don't think Ill have issues with its working load. I do like the idea of cleats though to keep everything nice and flat. I may add an apron for...
I have a table top Im torn on whether to add an apron to. Its 30" x 60". Its about 1.2" thick toasted soft maple. Theoretically the 'toasting' (marketed Cambia maple at my lumber yard) should make...
Ugh, I did see that review ... not a glowing endorsement. Im sort of hoping they got some quirks ironed out but realize they probably didnt re-design the whole table-alignment process.
Edit:...
Truthfully the fence is one of the bigger issues I want to make sure works well. The G0675 doesn't have an end mounted fence but you have to remove the fence every time you do a change-over. I just...
Thats good to know about your Inca. I can get the Grizz at about half retail, so I do feel its good value at that price ... if it works like its supposed to ;)
Thanks very much for the feedback Rod, I appreciate it. I agree, there could be some very nice perks with a combo, not least of which is 10" of jointing capacity. Who makes your machine?
Hey fellas. I have the opportunity to purchase the aforementioned 10" J/P combo. Im hoping to get a couple specific pieces of feedback:
How reliable is this machine over time? Its been on the...
Dave, I like that underside. I think I'll incorporate something like that for leg support and edges. Perfect!
At the moment I don't think Ill add any drawers, but that may change. On the nook...
Thats where I started conceptually. Would differential movement between the ply and walnut cause splitting/cracking? Thats my worry with that approach. I wouldn't be doing <1/32" veneers, It'd...
Here is a super rough sketch of the office and how I originally intended on doing the L shape.
379748
Obviously one arm of the desk is dictated in size and orientation by the nook it will fit...
Haven't figured that out yet. I think now with a plan for the top Ill model up the table to sorta see what makes sense for the undercarriage. I had originally planned a sorta elaborate two piece...
Yeah, that looks great! I think Ill adopt that approach for the aesthetic, but what should be done about the underside for a table application, opposed to whats shown there?
With the bottom still...
Hi all, making a desk for myself. It'll be walnut and Id like the aesthetic of a 2" top but I really dont care if its actually solid 2". Theres the cost of 8 or 10/4 walnut which is a factor, but...
Man you're not kidding, what a disappointment. It had accumulated in the time between two coats, that'll never happen again.
Thanks
Perfect, thanks very much. Ive read something like 1000 grit is too light and will actually lead to the finish failing in the future. Do you have any insight here? Im thinking a once over with 220...
So I shot a table top last weekend and it really looks pretty great, but its got some stripe-y-ness to it I thought would dissipate and hasn't. I realized when I cleaned my gun that some residue had...
Thanks very much! I can't stand the builder mouldings either. We built the house and the irony was that the builder refused to do craftsman style trim AND refused to do no trim. They said they had...
Thanks guys. The window casing we hadn't thought about in advance and was sort of spur of the moment and Im glad its impactful, we like it.
First major trim project and its pretty interesting as...
While maybe not a 'proper' woodworking project, it sort of is/was.
Anyway, wanted to add a craftsman style trim to our dining room. Exterior of the house is definitely craftsman and wanted to...
Thanks everyone. Ill see if I can do some demos of BLO under shellac and spray some poly and see how it works!