Just read this topic..a bit late maybe, sorry for that.
But i use the autofocus for every single thing i laser. I'm Lucky to had my hands laid on a programmable Ultrasonic sensor (distance 20-150mm)...
Type: Posts; User: Kees Soeters; Keyword(s):
Just read this topic..a bit late maybe, sorry for that.
But i use the autofocus for every single thing i laser. I'm Lucky to had my hands laid on a programmable Ultrasonic sensor (distance 20-150mm)...
I have tried powder-coating-pigment.. I works but you have to keep your work aligned all the time, turn off the air-assist, off-focus a bit and experiment with speed and power for the best results....
Normally, when it is cast acryl it is mentioned on the protective sheet. If not, it is almost certainly extruded.. Cast Acrylic sheet is better in many ways: it works better and it is a bit stronger...
thanks... Anyway, it works fine and my machine stays clean, i use the same fluid since februari 2012!. The coolingcapacity is good enough.
Kees
I tried several times to upload the pictures of the container but it seems prohibited..
So i placed them in my dropbox.. Toe see them you can click the next links:...
Ofcourse the color is not important.. but they both stand in the store. Same price, The blue one is till -26 degr.Celcius and the pink one till -20degrees... I never had a temperature below +10...
Can be that this fluid, i use, is premixed with water.. but there is nothing mentioned on the package that it already contains water, nor that it has to be mixed in a certain ratio with water..
...
Oh.. Anyway i bought the blue version as this looked nicer with my blue machine (i couldn't find fluoriscent green so fast and pink??? maybe if i was a girl..)
I didn't mix it with anything and...
'What i mean is the stuff you pour in your car's radiator. You shouldn't mix it with water.. The antifreeze is what you pour in your windshield spray-reservoir.
I did some tests in the past for...
Just curious: why is everybody using water?? Adding corrosive liquids like bleech? polute their systems with algea? have to change and filter the whole system periodically?
I use the same car...
Do you keep your cooling-liquid-temperature low enough? (~19-20 degrees Celcius .. ~22degrees max)
I spoiled my first tube within a year, probably caused by insufficient cooling (in summer up to 35...
You don't know what's in the coffeemug, she's holding:rolleyes:
Kees
Have you checked the "Downloadable Projects" page on http://www.rabbitlaserusa.com/ ?
Many fancy cardboxes there. Scale them to your needs. Easy to laser aswell..
Kees
make it a party-gag.. The one that holds his hand in the beam is the winner:D
No, I had it once while I was building my laser ( no cap protection installed yet..) . I wanted to pick up something and...
If you do the same job to, for instance, wood? does it look right then?
I don't know the Shenhui laser and its controller, maybe there is a setting just not right but my first feeling says there is...
If you know the IP-adress of the controler (as set in the menu) AND your computer is in the same range (for example 192.168.10.5 for the controller and 192.168.10.1 for the computer) you can use the...
60W @ 14.9 degrees steady (but my workshop-temperature is only 16-17 degrees average)
Kees
For that pricetag it can be good enough..
But to be honest: it's xxx.. the machine is built as garbage, the software is xxx and even the electronics are unreliable.. but for merely 500$ you may get...
I had done that too but the middle of the "b" was just a guess.. Anyway it didn't lead to a solution, although the font looks familiar as you stated...
I have a collection of about 60.000 fonts (and...
I had found Sauber script too.. eventually he choose Brush MT instead..
Thanks all for your contribution
Kees
Thank you all for your effort and advices.:)
I will show him a few designs with different fonts (like Kensington, which is known as Calgary Script, and BrushMT) and see which he likes most
Kees
It's not the shadow that's needed.. I just need the font as the text will be something else but this font appealed to the customer and, sure, i will try to make his text with that font.... if it can...
This is a (retouched) photo from a boat's bow...According to the customer it was hand painted.. But i think the "painter" used stickers..
320644
Indeed there is a shadow in grey:
Now i have to...
320640
I tried several Font-search engines, without result..
Help is very appreciated..
Kees
Also here a few nice models: http://www.rabbitlaserusa.com/ downloadable projects.