bit different engrave as its a reflection from the plate under the glass
really odd as the fiber laser will not etch the glass but reflects off what's under the glass and not reversed
so if you...
Type: Posts; User: stan kern; Keyword(s):
bit different engrave as its a reflection from the plate under the glass
really odd as the fiber laser will not etch the glass but reflects off what's under the glass and not reversed
so if you...
Blanks
I have been buying laser engrave blanks from amazon but now that the 300 watt laser is cutting metal really good
I will be cutting my own and i have so far some stainless and some just...
thanks I added a few more photos
Using a SFX laser M7 mopa fiber laser 100 watt to engrave the axe face
this went very well the detail is surprising
https://youtu.be/2HEA07X-jlk
At first I was turned off because of the gas assist cost and how quickly is goes, so it adds to the cost
But thin stainless 1.20 mm can be cut with 60 psi air and air does not cost so that excited...
experimenting a bit used 55psi air vs O2 to assist in cutting thin metals (1.20 mm)
https://youtu.be/k1xVzyEyc70
turned out ok and lightburn worked well , I can now make my own blanks for the...
Nicely done , looks good on the wall
I did 2 of these in 2020 laser and plasma
https://youtu.be/T9qJdCW7wPw tree of life laser cut
https://youtu.be/Tb-tgJGApJQ tree of life plasma cut
this video was done for social media platforms that's why its vertical
but its an interesting engrave for a pendant
pendant engrave using a 100 watt mopa fiber laser
...
using logic trace I will show tracing out this graphic and creating a file
to vinyl print and cut then heat transfer this to a canvas tote bag
...
using logic trace I will show tracing out the sunset scene and creating
a file to vinyl print and heat transfer to a canvas tote bag
...
this is an interesting compass design showing rail, mountains stars and water,
using logic trace I will creat e a file for the CO2 laser to cut this out
...
mine from amazon
18inx18in mahogany plywood cut out from a design with a 300 watt co2 laser air assist
https://youtu.be/w43W_elB5OA
you are right and its easy to get carried away with ideas
wish i had this equipment when i built furniture in the 80's
never thought of it that way , but as a younger person way back I do remember sun and magnifying glass on a piece of pine
and a penciled design
a short video showing the engraving on 3 graphics
going to engrave some older drawn files on black anodized aluminum business cards
Keith
I am finally starting to see what the fiber laser can do and that is great detail very small, ie a penny or dime in size with all the detail of
a old traced out file that was 18in...
using the fiber laser on some of my old files
engraving some aluminum and brass shows the detail as these engraves are less than 50mm
the fiber laser can engrave very detailed graphics and...
showing a maple leaf design engraved on a piece of aluminum using the mopa fiber laser
https://youtu.be/oZfhrm9-1xw
you are welcome , I am trying to learn all the new things about mopa fiber laser
and re-using all my old files from 18 in square to now 44 mm square
using an old traced file I will show engraving this image with the fiber laser on brass
detail here is amazing
https://youtu.be/8G7nenzCAJk
using an old aspire file traced out will show engraving a piece of brass with the fiber laser setup
https://youtu.be/5iPip7nR4Z4
I use a roland vinyl cutter/plotter, it does an excellent job of cutting detailed dxf files (designs or letters)
hmm thats not what I had in mind , then i guess lay it in and sand off
yes you can apply something like this to a curved back, just use a thin material like a veneer and find a way to hold down each piece possibly use a contact cement
and apply pressure.
Also you...