Search:

348485

I have a PSI Super Dust Destroyer with a tall filter. I disassembled it, made up a couple plywood brackets and mounted it in a corner. I bought a plastic sump pump container from Home...

I have this amplifier hooked up to a pair of wall mounted speakers. I currently use an iPod Shuffle as the music source but you can hook up just about anything with an RCA or headphone jack.
...

I own a JC10 and had what I believe is the same problem. The issue for me was a bit of debris keeping a check valve partially open. This caused the tank not to fill and the motor ran longer than it...

please add me to the list

I came up with this box to hold chargers and spare batteries. I put the chargers on a timer so the batteries are not constantly charging.
Works pretty well for me.

255265

255266

please add me to the list.

Please add me to the list.

Yuri,

I have a slightly older version of the same bandsaw and I'm contemplating upgrading the motor to a 1.5 HP baldor. Can you tell me the model number of the smaller browning pulley on the...

Please add me to the list.

Please add me to the list.

please count me in as well.

please count me in.

please add me to the list

Please add my name to the list. Thanks.

Please add me to the list. Thanks.

Please add me to the list.

If you use THWN all the way, I believe you will need to run conduit inside the house as well as it has to be protected even in stud bays.

I did the same thing you are thinking about. I installed a...

Below is a picture of the set I made from the Lee Valley kit. On the right are a couple of drawbore pins I made following Chris Schwarz's instructions using a punch pin set from Sears.
I also made a...

I made a set of screwdrivers with the screw driver set from Lee Valley. After drilling the center hole and turning the handle on the lathe, I used a knife and small files to make a small groove part...

I bought the 16 piece set from Woodcraft (Item #147067) when it was on sale for approx 1/2 price. I have been pleased with the performance of the set. They are not Famag's but you get 16 bits for the...

I have the overarm dust collection tube on my PCS. It is basically a couple interlocking hollow steel tubes with a flexible hose connector on each end. They supply a "splitter" for the 4" dust port...

I bought a Square-D main 100Amp panel from home depot for my detached garage sub panel (which is actually only 60 amps). I like having the main breaker to switch and shut off all circuits in the...

Thanks,

I like the t1-11 look and have decided to leave it natural.

203052

I used T1-11 plywood on the inside walls of my shop.

please count me in