The Planer's a Martin T-45 but I think any large planer would have the same effect. The Motor is 10HP and the Brake is really fast considering the cutterhead is probably 100 lbs. Other machines...
Type: Posts; User: Rick Fisher; Keyword(s):
The Planer's a Martin T-45 but I think any large planer would have the same effect. The Motor is 10HP and the Brake is really fast considering the cutterhead is probably 100 lbs. Other machines...
I gutted out all my spiral and went clamp together. I found Spiral okay but not easy to work with. Clamp together is fantastic.
I have a very similar shop and set up as the OP.
I have the 20HP Phase Perfect which is supplied by a 100A, 220V PH1 Breaker. My compressor and Dust collector are 5HP and 4HP. Both are...
Most of then are made by Tigra in Germany. Also made in China and Taiwan. Tigra Cutters usually come in a plastic sliding lid box of 10. I've bought them from BAM Carbide in the past but as Rod...
I have a pneumatic MR and a box of all the patterns. I've never used them. Only used it a hand full of times. If I ever have time I'm going to figure out how it all works.
I have a home made elevator that is technically rated for 5000 LBS. I limit it to 1200 lbs and never ride it. I build a circular staircase next to it. The Elevator will hold 6' x 4' and is used...
I would assume, and I don't know, does the planer head just get used separately from the sander ? I have a 37" Wide Belt and have never been one to make only one pass after running through the...
i've seen the Neiderman Bag house dust collectors .. I love them. If I could find a short one I would buy one .. lol
Albert if my memory serves, don't you have a huge Felder RL-250 or RL 300 ? I seem to remember a post some years ago. I'm betting that would work with a really wide planer. Not to Hijack, I...
I have a 24" wide planer.. its actually 24.8" .. its a T-45 .. 2 days ago I was asked to plane a 24" wide D-Fir slab about 8 feet long. My DC is a Felder 4hp RL-160. I had hoped to take...
When I first starting using a jointer I had the same problem. It was caused by my technique. So much of the outcome of using a jointer is how hard you push and in what direction. I would measure...
Hello Albert, I'm not aware of the SCM but had a friend who had a Timesavers with a planer head, 43 " if my memory serves. he said it was extremely capable, but required lots and lots of dust...
I have a 20hp Phase perfect. I would recommend one only if you are going to run more than one machine with it.
Mine is a PP-20. Its wired to a 100 amp 230V single phase breaker. The PP...
In this case, I would take a look at the parts diagram and see if it gives you any clues.
I have a couple Porter Cable 3.5hp fixed base and a Festool 2200. The Festool would be wasted in a table. The Festool is extremely user friendly and precise. Its also heavy. I used it to cut...
I have a digital phase converter. Its a Phase Perfect 20hp which I bought new in about 2008. Its been fantastic and trouble free. It feeds a 3 Phase Panel which distributes power to half a dozen...
I thought it was static, which it could be. I didn't see the 70% power but that says static. I did see that it mentioned not using a 3 phase brake, that made me think it was a VFD.
I have a...
I've done that. Give yourself a break, laugh.
If I was looking for a jointer in that size I would buy used. I would also go with the widest machine I could find and afford. I have a 20" Jointer, I had a 6" Delta, 12" Griggio, and upgraded to...
I think the stock yellow tires, especially when a bit older do that.
I replaced mine with Purple from Western Roller which are quite a bit softer. The upside is that they work great, the...
Check if the saw has a break on the main motor and if it does make sure you tell the company selling you the VFD. It may or may not be an issue.
The owners manual for this machine is actually pretty good. The add-on Manual for the "Ready 3" controller is extremely lacking. It has some positive points, for instance they tell you what the...
That makes sense Albert. I only think it moves 4.72" because that's what the LED reads. It travels from 4.72 to 0 and back again as it goes up and down. I will measure it ..
I will figure out...
Albert if you have a moment, or anyone that may know.
The shaper has automated rise/fall of the spindle. Factory set seems to be all the way down at 4.72" .. all the way up is 0 .. It seems...
I have a Houfek 3, 950 or 37". Its in the class of the Sandya S1 In my opinion. That little Felder is a great idea. Lots of wide belts dont get used for more than an hour at a time. There is a...