Bill, I have to source motors for work. Had very good luck on eBay over the years. Helps if you can be patient, most of the time that is not the case.
Ron
Type: Posts; User: Ron Selzer; Keyword(s):
Bill, I have to source motors for work. Had very good luck on eBay over the years. Helps if you can be patient, most of the time that is not the case.
Ron
I got started on cherry some years back when Yoder lumber offered Cherry 4' & 5', 500' bdft bundles for a little over $500. I bought a bundle and had them to skip plane to 7/8". This is not all...
I never got out of the 20's with any of my rigs. Tried not to run less than 70mph all the time. Never had a spare tank, came close to empty too many times. 4000 miles front tire, 6000 rear tire. BMW...
Enjoy it, like the extra fuel tank.
Ron
Michael, what is your rig? Favorite one I had was a Watsonian Oxford hanging on a Yamaha XJ1100J. Have had others, stop riding 9 yrs ago. Last was a Vetter Terraplane hanging on a BMW R1100?C??.
Ron
That is exactly how it is mounted to the SawStop PCS pictured above. The extension wing is still there.
Ron
back in the 90's when working for Honeywell, the fitters would order in 5/32?, 1/4, 3/8/ 1/2 od copper tubing in 10" sticks. came in a bundle of 250'?. would bend it with special benders. real nice...
Ok I finally see the face flash very quickly then gone, if I squint really hard I see a man's face.
Ron
I keep the two nicest vehicles on monthly plan at Moo Moo car wash primarily for the underbody, secondary for the looks. The vacuums at the one in Lancaster are always in use, just not a lot of...
Great idea
Ron
Moo-Moo Car Wash came on heavy ten years? ago in Central Ohio. Car washes at gas stations were never plenty and now I can't think of one that is open.
Ron
20v DeWalt, use 5amp batteries with it. If you want to go at it for hours then 8,9,12,amp batteries
I prefer 5 amp and change as needed as I only run that hard once a year. Use the batteries with...
I agree with Lee, let the saw run for about five minutes then shut it off for a minute or however long it takes for the blade to come to a complete stop. Then restart the saw.
I also agree with the...
I have a Berol less than a foot from the computer and another one down in the shop
Ron
Very nice work!
Not what I want in my house, however I could look at it and study it for at least an hour if I had the opportunity to do so.
Ron
Scraped a couple of those 8" saws twenty years or so ago. Could not give them away. Dad inherited them in the 60's
Ron
these are shop cabinets. As far as quality goes, I don't care too much. I thought it would be nice just to have a front to cover the slides/ Slides are Richelieu for extension. Fronts are to be...
Don't know where you live or where you are building this building. HERE in Central Ohio some/all of the newer posts rot off at ground level in 20-30 years. The OLD TREATED posts going back 60 years...
wash the surface with alcohol, let dry then apply the label.
Ron
I have learned over the years that a lot of tools loaned out don't come back especially if not returned in a month. The number of people I loan tools to now is 1 and even then they don't all come...
Foam backing rod with 1/8" of white Silicone caulking.
Ron
Personally I prefer horsepower. I use a higher horsepower router than others I know for the same job. I firmly believe that a higher horsepower router is easier to use as far as not bogging down ,...
As long as the correct breaker is used for the gauge of wire, the branch circuit is protected. Whatever that is wired/plugged into the circuit may not be protected.
Ron
Alan stated that the solar disconnects when Utility Co. power is lost. Also he has several disconnects already. Now it would be possible to install an Automatic Transfer switch OR a manual transfer...
I would go with this one
UNLESS you want a 10 1/4" saw, an 8 1/4 saw will cut more than 3" and cost about half of the 10 1/4" saw.
Can aways buy the saw off of Amazon and see if it will mount up,...