I don't know about the Nova, but between the Rikon and Jet, I would prefer the Jet based on my experience it both. I have a friend who seems more than happy with the Turncrafter Lathe he got from...
Type: Posts; User: Bob Vavricka; Keyword(s):
I don't know about the Nova, but between the Rikon and Jet, I would prefer the Jet based on my experience it both. I have a friend who seems more than happy with the Turncrafter Lathe he got from...
I realize the pictures I posted may not make it clear what the Clincher Fence System does and how it works, in fact, I didn't either until I did some searching and still didn't find a lot of...
Although this company has been out of business for quite a while, this is an unused still in the box unit. I took the instruction booklet out of the cellophane to take pictures. The rest is in the...
Thanks to everyone for their thoughts. I think I will pass on the plane but will take another look at it tomorrow if it is still there but will be much more informed from all your comments. Thank You...
I was at an estate sale today and they had this Stanley Bailey #7 Made in England plane. From what I can tell the Made in England plans are not considered as good as the Made in USA planes. This...
Private message sent.
I got these with some other used lathe accessories I bought and I don't have a Nova Chuck. They have a model number of CA6004 and I see Nova Mini Cole jaws with a model no. of 6006 online. I don't...
I'm confused. You said the gouge measures .515 and think a 7/16 (.437) bit will work. Do you mean a 9/16 bit?
Thanks for the replies, I decided to buy the AM6008/1QTHVLP package off the Homestead Page. They also have an Ebay page and it looked like the same setup was a little more from Ebay. I did call and...
Minwax makes an ultra-flat version of their Polycrylic Finish.
Give me your recommendation for a conversion spray gun that will be used primarily for waterborne finishes. I have a 60-gallon 5hp compressor that is rated at 18.1 CFM @ 90 psi. I would also like to...
Penn State industries has some salt peppermill kits that use what they call a jam chuck like you described. They have one that is 1" that will probably expand to what you need. 1in Jam chuck for Mini...
103 F in Oklahoma today and tomorrow. Projected low 80 F.
I guess going to Tokyo wouldn't help me cool off.
Bob V.
Found what I was looking for. It is called a Turmkreisel or tower top.
Thanks
I made this top that spins on a pedestal and catches on the rim instead of falling off when it stops spinning. It has a name, but I can't remember it or find it searching for types of tops. I believe...
I pre-painted the OSB I put up in my shop. I put a coat of oil based primer on (KILZ) the coated with the latex paint. I liked the results. I needed a small piece to finish the job and just coated it...
Thanks Robert, I couldn't duplicate what you said, but with that information I was able to find out how to put a hairline around the outline of the text and delete the fill. Thanks for pointing me...
I am a hobbyist and have a used 40 watt Epilog Mini laser for my own use mostly. I have been asked to make some stencils out of mylar that are mostly text. I have a font called Balton Stencil that...
No, the softener is not recharging at the time this happens. I believe you are right that the bouncing pressure creates the noise at the head. If it wasn't for the noise at the head I wouldn't even...
The water softener doesn't have any water coming out of the drain tube except during regeneration. The head information says it should be put in a system with over 125psi and the old head I replace...
House was probably built in the 60's. There is no pressure regulator. In the 32 years I have lived here, I have replaced/modified probably 80-90% of the water lines. Originally copper under the...
Bill,
I know the water pressure is high, but it's been that way for 33 years and the noise just started.
A pressure regulator is a good idea.
It is City water. No hammer arrestors in the house. ...
I have plumbing mystery and I am posting this knowing the great amount of expertise in this community.
I have a water softener and it started making an intermittent noise a month or so ago. I...
Looking at your first picture, it appears the pin on the one on the left in the picture is rotated and the part that rotates it is pulled out to the left. I think if it is put back in the position of...
It has been a long time since I worked on a Powermatic 90 lathe. But if I remember correctly the belt was fairly wide and I wonder if you will find a suitable link belt to work with it.