Printable View
Anyone know what these white spots in my dried maple are and if there is any concern with them being used in a cutting board? Only in this one board. They are not soft and appear to be discolored solid wood but didn’t know if it were something like a fungus or whatnot. This board was cut so the spots run throughout and not just the surface. thanks.
Attachment 415687
They are: UGLY. And even the color is bad. I think the doctors call it "spalting".
I thought spalting was the black lines in wood but regardless I pulled the 3 pieces with it on them out and replaced them. Seems like totally fine wood but don’t want to ruin a good cutting board just in case. Thanks.
I believe that is chatoyance or figure, which is much better looking on face grain rather than edge grain. Could be wrong though.
Matt, in this case it had the same look on both the face grain and the edge grain after cutting.
Quote:
Originally Posted by Matt Day
Matt, in this case it had the same look on both the face grain and the edge grain after cutting.
Quote:
Originally Posted by Matt Day
Not sure what it is but I don't think it is harmful in a cutting board. I've seen this in figured maple when cut at certain angles. It doesn't seem to be soft but will chip out during working the surface. Just a grain phenomenon I think.
It is the beginning stages of rot, white rot. It also appears your maple wasn't cut and dried quickly enough as it looks like it has gray stain. Other than color it should be fine. Once wood is below ~20% moisture it won't continue to rot.
It's also a bad idea to glue up that board on the end (left side) with that grain oriented perpendicular to the others. You are asking for a glue joint failure.
Thanks. I think you are seeing my workbench on the left he left that looks perpendicular. That’s what the boards were sitting on.
Quote:
Originally Posted by Jason Mikits
Ooops! Sorry, you are correct. Disregard that comment. :)
It looks like chatoyance to me.
On 2nd thought, it looks like flecks. Do a search on flecking in wood. Here is a link to examples. https://www.bing.com/images/search?q...C5&FORM=IQFRBA
I see spalting (or rot, depending on your preferred term) and maybe a couple of bug holes filled up with hardened frass. It would be fine for a lot of things but not what I would suggest for a cutting board for best results.
Zach
It looks like the wood is stained. The maple looks gray - that is the stain. I am not sure what causes the white spots. Stain happens if the log sits too long in the summer before it is cut into lumber. Logs (especially hard maple) need to be cut fresh to maintain the white wood. We cut about 60% hard maple (65,000 to 70,000 bdft per day). Before painted cabinets, the white select and better was the high end grade and our bread and butter. Now it is difficult to sell because no one needs the white wood if you paint it. Paint covers anything - it just needs to be sound. Not just maple stains. Beech and white birch show stain very well, too. The darker wood doesn't show it as well.
It is really in the eye of the beholder if you like it or not. I have been spoiled by our lumber graders. I love spalted, but not stained.