3 Attachment(s)
TopCoat Toning Experiment
The good folks at Woodcraft told me about toning! So playing Mad Scientist I mixed up a batch of General Finishes Enduro Clear Poly and some water based Brown Stain. i did a 3:1 ratio. 3 parts poly, 1 part Water based Stain. I set my fuji q5 up and dialed in the fan pattern.( i think its correct) I used an old hollow core door that was properly prepped and primed with BIN. Upon spraying, the first swipe looked great... then the 50% overlap gave me a dreaded tiger stripe. What am i doing wrong? Should I have used a dye stain instead of pigmented stain?
Attachment 507857 Attachment 507858Attachment 507856