Originally Posted by
Andrew Hughes
I'm still seeing a piece of wood that's getting pulled down into the throat plate.The coco bolo has not been jointed flat and your plastic throat plate is flexing.
I had the same thing happen to me when I ran a RK blade on a Laguna 16 inch.I was cutting Gaboon Ebony It as some years ago and I don't remember if I ever got it solved.
Try this lay a piece of 3/4 plywood on top of your table make the cut with a flat side down.
I think you be able to get the blade to cut but will find that the wood is out classing your saw.