I love making windows and doors in my free time, this is my hobby. I eventually want to do timber framing too. A shaper is an important part of making the above, and I want to upgrade. Background: My current machine is a Jet JWS-25CS (3HP, up to 3/4 spindle) I need support for a 1 1/4''...
Last Post By: Brian Holcombe Yesterday, 12:32 PMI was able to purchase 2 used Holtey Planes (earlier 98 series smoothers, not low angle) for an incredibly low price. The owner died. With the planes came 2 other blades that were not for those planes and I just stored them away. I am now on a mission to improve the performance of these fancy...
Last Post By: Charles Edward Yesterday, 12:21 PMAfter reading all of the fine work by several members, I decided that I wanted to add the dust bin sensor to my Oneida Super Dust Gorilla. I ordered most of the parts on eBay. The sensor was $3.79, the delay relay board was $4.95 and the 12 V power supply was $9.99. I used some LED trailer...
Last Post By: Rod Sheridan Yesterday, 12:59 PMIn a Master ( and only) Bathroom in the house...where all the wood cabinets are real wood...with raised panel doors.....these are to be changed over next.. Butt jointed corners, surrounding flat, plywood panels...20 coats+ of white paint ( Lead?) was supposed to be 4 doors here, until someone...
Last Post By: steven c newman Yesterday, 8:49 PMI normally clean my Sawstop with WD40, then apply Boshield T9 and finally paste wax and this has been OK but not as good as I would like. I saw this video ( https://www.youtube.com/watch?v=v_HVA391T0E&t=10s ) and it sparked my interest so I watched a few others and read a few reviews which have...
Last Post By: Lee Schierer Yesterday, 8:49 PMUntil it is falling apart and things fall out. (Votes: 34)
Until someone gives me a new on as a gift. (Votes: 5)
Whenever I feel like it. (Votes: 5)
I have many wallets and rotate them. (Votes: 0)
Don't carry a wallet. (Votes: 2)
I use a money clip instead. (Votes: 1)
Folks, these are Ulmia chisels, as Joe Stankus surmises in his post, and I'm upping my asking price accordingly to $160 for the set, plus shipping.
Juan Hovey Today, 12:34 AMJoe -- Yikes. Many thanks for the heads up. These are Ulmia chisels and worth more than $20 apiece, to be sure. I am revising the ad accordingly.
Juan Hovey Today, 12:26 AMFrom my memory, this would be 5/32, ~7/64, 5/16 and 9/16" if one wants to know the SAE sizes.
Since mortise and tenon work is done to
As humble as this table may be, it seems as the table purchased early in a marriage and staying in the family may have a lot of sentimental value. In
Jim Koepke Yesterday, 11:35 PMI took a class in veering and marquetry and have focused on hammer veneering with hide glue, since I don't have a vacuum table at home (and I'm a Neanderthal,
Mark Leifer Yesterday, 10:59 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Yesterday, 5:55 PM