My friend in So. Dk. was given a fair amount of Osage Orange. He hauled home and called me to tell me how heavy it was. He said it had been in a barn for several years and was thrilled to have. The next day his back was hurting severely. He lives in a small town that has pretty good medical care....
Last Post By: Maurice Mcmurry Today, 8:19 AMAnswer = Tape
Last Post By: Larry Edgerton Yesterday, 10:48 AMHi folks, I'm looking for advice on whether to ignore/repair/euthanize a misaligned Dewalt 735. A couple of years ago, I bought a used Dewalt 735 from a guy who had already installed a byrd cutterhead on it. I've recently realized that it is out of parallel by ~0.013". Picture attached...
Last Post By: Sam Shankar Today, 8:47 AMWhile reviewing different approaches in preparing card scrapers I found the method used by Rob Cosman to be the most involved. Basically he recommends flattening and polishing the 3 surfaces of each side, eventually using a 16000 grit Shapton stone. He also employs the Charlesworth ruler trick to...
Last Post By: Derek Cohen Yesterday, 11:30 PMi have a adapter for a chuck on a morse taper and it works great,,my only problem is then i put it in the headstock to use it come out after you turn the machine on the morse taper comes out,,,i know you can make a drawbar for it but my problem is,, its flat with no threads,,it has a small hole but...
Last Post By: jeff oldham Yesterday, 9:42 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
For smaller cables (like on my multi tool) I use these, meant for music cables:
https://www.daddario.com/products/ac.../cable-ties-1/
Went too the site poked around for a while. No problem.
Mike Gresham Today, 9:19 AMI use a velcro ties intended for garden hose I think 11 inches long and has a slot to keep the strap attached to the cord. This extension cord is 12 ga.
Curt Harms Today, 9:17 AMAnyone else having issues getting on the site? I've tried on pc and mobile and get the same message: Web Site Blocked
John Kananis Today, 9:16 AM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Yesterday, 8:46 PM