Lord, give me patience and understanding for those folks that drive needlessly in the left lane. Amen
Last Post By: Bill Dufour Today, 4:09 PMSaw this today while reading a story about the prospect of electrical distribution networks failing due to heat: When I mentioned to Candy that transformers don't "slow down" high voltage, but "step down" high-voltage to a lower voltage, she said, "it's just semantics." Though it seems...
Last Post By: Nicholas Lawrence Today, 8:16 AMAccording to the book I'm reading (What If ? 2 by Randall Munroe) The second programmable computer, UNIVAC was the size of a room, made in 1951 from vacuum tubes. If the same machine was made from Iphone chips today, they could be imbedded in a single grain of salt.
Last Post By: Alex Zeller Today, 5:46 PMHad a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Bill Dufour Today, 3:59 PMI buy hardware items for my business from Zoro Tools. I ordered some plastic clamping knobs and they were not as described. So I called customer service which by the way is open till 9:00 pm. A young lady answered and apologized. She said she would credit my order and to keep the knobs or...
Last Post By: Patty Hann Today, 7:09 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Jim is correct about it as far as color and being a gnarly tree. A very long lasting wood and used for fence posts still in the Midwest. It's a heavy
Ronald Blue Today, 7:43 PMI have a Jet Air Filter and lost the remote. I bought one from Ereplacement parts. However, I have problems with it due to interference from LED lights.
Larry Frank Today, 7:36 PMyeah first time for me doing that, I wanted to be able to see around the edges of the 2x12s, to see the thickness, but how to deal with the gaps .. 1/4"
Joe Wood Today, 7:31 PMIf you need the switch, this should be the one you need: https://www.ereplacementparts.com/on...h-p-57795.html
Michael Zerance Today, 7:28 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Today, 7:57 PM